Australian/New Zealand Luthiers Forum

seymour duncan has heaps of wiring diagrams - this one should help you.
it is for 2 humbuckers, 2 vols & a 3 way switch.

http://www.seymourduncan.com/support/wi ... c=2h_2v_3w

cheers
PJ

I've just completed the neck on my first build & am really happy with the results. Of course with absolutely no prior woodworking experience, you're talking to a bloody expert here! I used a cheap Bunnings rasp & small plane - rasped the head & heel ends roughly to shape, then planed out between.] I...

I got a piece of blackwood veneer for a headstock from guitaraust.com.au
I don't think they carry much stock - I got the only one when I ordered earlier in the year - guess they might have more now.
cheers,
PJ

There is so much inspirational stuff on this forum - loving it all

do I cut the red wire or the green?!!! ha ha. I think I'll give this first one a go before I glue it on to the neck. I'm using a pre-radiused board, & have a press caul to match which I'll try with my drill press. Then a trip to Carbatec to grab some West epoxy for the gluing! I've got a bunch of th...

thanks for the info guys.
it's great to hear what works for each person, & they're all often different!
I'll try to post some pics as I'm getting into things - might be month or more though. Probably be under the heading "A Fools Guide to Building A Guitar".......
PJ

Hi everyone, as I am just starting to make my first neck I have been doing a bit of reading up on what order to do things. I can see the merits of shaping the neck before the fingerboard goes on, so that neck movement that may occur while removing timber has happened prior to fingerboard gluing. The...

thanks for the welcome & the tips.
PJ

hi everyone, new member here & I'm just about to start building my first guitar - a bolt on neck solidbody. I'll probably only get an hour or two a week to work on it, so it will be a long, slow process - especially with the fairly bare workshop I have! LOL. Hoping to have it done by the end of the ...